KNX 4-in-1 Sensor (Flat Base Type)
KNX 4-in-1 Sensor (Illuminance, IR Motion, Temp. & Humidity), Ceiling Flat Mount, No Cutout Required, KNX Bus
The equipment is installed using a ceiling-mounted flat-bottom method, with a diameter D=80mm and a height H=30mm. To facilitate quick installation, it is essential to ensure that the equipment is operated, tested, inspected, and maintained correctly.
(1) Cyclic output function of illuminance, temperature, and humidity values;
(2) Two channels each for illuminance, temperature, and humidity control, capable of outputting 1-bit, 4-bit, and 1-byte data;
(3) Infrared motion trigger control function;
(4) Temperature change trigger control function;
(5) Humidity change trigger control function;
(6) Infrared motion and brightness logic function;
(7) Master-slave function of infrared motion;
(8) Integrated control function of infrared motion sensing and illuminance sensing;
(9) Channel control output function of illuminance and infrared motion by object;
(10) Function of using illuminance and motion together to control lighting;
(11) Function of using temperature and humidity together to control air conditioner switch;
(12) Four-in-one sensor of infrared motion, illuminance, temperature, and humidity.
Shengzhixiang Hot Spring Resort, Xiamen 
